收藏本站
3M ? ATG Tape
987
Application Techniques
Storage
Shelf Life
Recognition/
Certification
Product Use
Warranty and
Limited Remedy
Limitation of Liability
3
? Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application pressure helps develop better adhesive contact and
improve bond strength.
? To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well
unified.
? Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
Store in original cartons at 70°F (21°C) and 50% R.H.
To obtain best performance, use this product within 18 months from date of
manufacture.
MSDS: 3M has not prepared a MSDS for this product which is not subject to the MSDS requirements of
the Occupational Safety and Health Administration ’ s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions
for use, the product should not present a health and safety hazard. However, use or processing of the
product in a manner not in accordance with the directions for use may affect its performance and present
potential health and safety hazards.
TSCA: This product is defined as an article under the Toxic Substances Control Act and therefore, it is
exempt from inventory listing requirements.
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M ’ s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user ’ s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user ’ s method of application.
Unless stated otherwise in 3M ’ s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user ’ s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M ’ s and seller ’ s sole obligation will be, at 3M ’ s option, to
replace the product or refund the purchase price.
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
ISO 9001: 2000
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards.
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
Recycled Paper
800-362-3550 ? 877-369-2923 (fax)
www.3M.com/industrial
40% pre-consumer
10% post-consumer
Printed in U.S.A.
?3M 2004 70-0709-3840-5 (6/04)
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
999-H15-PS2L571 CONN HD15 FEMALE OVER DUAL PS/2
9EL2 TVS BID 245V 200A
A-1JB CONN JACK AMC 50 OHMS STR SMD
A-DF09LL-WP-R CONN DSUB IP67 FMAL 9POS SLD CUP
A-DF09PP-WP-R CONN DSUB IP67 FMAL 9POS STR PCB
A-DF15AA-WP-R CONN DSUB IP67 FMAL PCB R/A 15PS
A-DF15LL-WP-R CONN DSUB IP67 FMAL 15POS SLDCUP
A-DF25-HOOD-WP-R CONN DSUB IP67 25POS FMAL W/HOOD
相关代理商/技术参数
9871-12 R/B 功能描述:PLUG BANANA 12" SET/2 RED/BLACK RoHS:否 类别:测试设备 >> 测试引线 - 香蕉，量表接口 系列:9871 标准包装:1 系列:6570 类型:插接线 配置:香蕉插头至短头鳄鱼夹 第一连接器:香蕉插头，单，屏蔽，直角 第二连接器:接线夹，隔离型，特大号 线缆长度:60.0"（1524.00mm） 所含物品:1 根引线，红 材料 - 绝缘体:硅树脂 堆叠方法:不可堆叠 线规:18 AWG 电压 - 额定:1000V（1kV） 额定电流:20A 额定值:CAT III 1000V，IEC 1010
9871-18BLK 功能描述:LEAD PLUG BANA RETRACT BLK 18" RoHS:否 类别:测试设备 >> 测试引线 - 香蕉，量表接口 系列:9871 标准包装:1 系列:6570 类型:插接线 配置:香蕉插头至短头鳄鱼夹 第一连接器:香蕉插头，单，屏蔽，直角 第二连接器:接线夹，隔离型，特大号 线缆长度:60.0"（1524.00mm） 所含物品:1 根引线，红 材料 - 绝缘体:硅树脂 堆叠方法:不可堆叠 线规:18 AWG 电压 - 额定:1000V（1kV） 额定电流:20A 额定值:CAT III 1000V，IEC 1010
9871-18RED 功能描述:LEAD PLUG BANA RETRACT RED 18" RoHS:否 类别:测试设备 >> 测试引线 - 香蕉，量表接口 系列:9871 标准包装:1 系列:6570 类型:插接线 配置:香蕉插头至短头鳄鱼夹 第一连接器:香蕉插头，单，屏蔽，直角 第二连接器:接线夹，隔离型，特大号 线缆长度:60.0"（1524.00mm） 所含物品:1 根引线，红 材料 - 绝缘体:硅树脂 堆叠方法:不可堆叠 线规:18 AWG 电压 - 额定:1000V（1kV） 额定电流:20A 额定值:CAT III 1000V，IEC 1010
9871-24BLK 功能描述:LEAD PLUG BANA RETRACT BLK 24" RoHS:否 类别:测试设备 >> 测试引线 - 香蕉，量表接口 系列:9871 标准包装:1 系列:6570 类型:插接线 配置:香蕉插头至短头鳄鱼夹 第一连接器:香蕉插头，单，屏蔽，直角 第二连接器:接线夹，隔离型，特大号 线缆长度:60.0"（1524.00mm） 所含物品:1 根引线，红 材料 - 绝缘体:硅树脂 堆叠方法:不可堆叠 线规:18 AWG 电压 - 额定:1000V（1kV） 额定电流:20A 额定值:CAT III 1000V，IEC 1010
9871-24RED 功能描述:LEAD PLUG BANA RETRACT RED 24" RoHS:否 类别:测试设备 >> 测试引线 - 香蕉，量表接口 系列:9871 标准包装:1 系列:6570 类型:插接线 配置:香蕉插头至短头鳄鱼夹 第一连接器:香蕉插头，单，屏蔽，直角 第二连接器:接线夹，隔离型，特大号 线缆长度:60.0"（1524.00mm） 所含物品:1 根引线，红 材料 - 绝缘体:硅树脂 堆叠方法:不可堆叠 线规:18 AWG 电压 - 额定:1000V（1kV） 额定电流:20A 额定值:CAT III 1000V，IEC 1010
9871-36 R/B 功能描述:PLUG BANANA 36" SET/2 RED/BLACK RoHS:是 类别:测试设备 >> 测试引线 - 香蕉，量表接口 系列:9871 标准包装:1 系列:6570 类型:插接线 配置:香蕉插头至短头鳄鱼夹 第一连接器:香蕉插头，单，屏蔽，直角 第二连接器:接线夹，隔离型，特大号 线缆长度:60.0"（1524.00mm） 所含物品:1 根引线，红 材料 - 绝缘体:硅树脂 堆叠方法:不可堆叠 线规:18 AWG 电压 - 额定:1000V（1kV） 额定电流:20A 额定值:CAT III 1000V，IEC 1010
9871-36BLK 功能描述:LEAD PLUG BANA RETRACT BLK 36" RoHS:否 类别:测试设备 >> 测试引线 - 香蕉，量表接口 系列:9871 标准包装:1 系列:6570 类型:插接线 配置:香蕉插头至短头鳄鱼夹 第一连接器:香蕉插头，单，屏蔽，直角 第二连接器:接线夹，隔离型，特大号 线缆长度:60.0"（1524.00mm） 所含物品:1 根引线，红 材料 - 绝缘体:硅树脂 堆叠方法:不可堆叠 线规:18 AWG 电压 - 额定:1000V（1kV） 额定电流:20A 额定值:CAT III 1000V，IEC 1010
9871-36RED 功能描述:LEAD PLUG BANA RETRACT RED 36" RoHS:否 类别:测试设备 >> 测试引线 - 香蕉，量表接口 系列:9871 标准包装:1 系列:6570 类型:插接线 配置:香蕉插头至短头鳄鱼夹 第一连接器:香蕉插头，单，屏蔽，直角 第二连接器:接线夹，隔离型，特大号 线缆长度:60.0"（1524.00mm） 所含物品:1 根引线，红 材料 - 绝缘体:硅树脂 堆叠方法:不可堆叠 线规:18 AWG 电压 - 额定:1000V（1kV） 额定电流:20A 额定值:CAT III 1000V，IEC 1010